Breathalyzer Alcovisor Mark X+ with printer
- Stock: In Stock
- Model: AL-C4-MARKXP-D
- EAN: 5904507904036
- Weight: 315g
- Dimensions: 145mm x 65mm x 33mm
Available Options
Alcovisor® Mark X+ is the best cost-effective product in the series of electrochemical breathalyzers, which enables measurements to be carried out using both a funnel cap (without a mouthpiece) and a mouthpiece. The set includes a WPT-2 thermal printer.
The analyzer is designed especially for people who need a device not only for their own use, but also for employee control. Mark X+ provides precise and quick analysis of the alcohol content in the exhaled air. The device uses a European electrochemical sensor that reacts only to alcohol molecules.Badanie może być wykonane w jednym z dwóch trybów pomiarowych: pełnym (dokładnym) oraz skróconym (szybkim).
The test can be performed in one of two measurement modes: full (accurate) and short (fast). The short measurement mode is used in situations where the exact knowledge of alcohol concentration is not required, but only information about whether the tested person is under the influence of alcohol and when a large number of measurements should be performed in a short period of time. In short mode, a special funnel cap is used instead of the traditional mouthpiece. During the inspection, the tested person's mouth does not come into contact with the cap, so it can be used many times. Thanks to this solution, it is possible not only to shorten the examination time, but also to reduce the costs associated with the use of disposable mouthpieces.
Alcovisor® Mark X+ has a system that protects the measuring cell against damage as a result of improperly performed test, a system for checking the proper operation of the analyzer before and after each measurement, a built-in real-time clock and measurement memory. The tester can save up to 10,000 results with the date, time of their execution and the selected measurement mode. This information can be displayed on the tester's screen or printed when a printer is connected to the device.
An additional advantage of the device is the ability to define the analyzer settings (including measurement units, exhalation force and time, information on the printout, number of copies, etc.) in accordance with the user's requirements. The device can be powered by 4 x 1.5V alkaline batteries, type AAA, from a cigarette lighter socket or via a mains adapter.
WPT-2 thermal printer which comes as a set is designed to work with the Alcovisor® Mark X+. Communication between the analyzer and the printer takes place via USB cable. It is powered by a Ni-Mh rechargeable battery with a capacity of 1800mAh.
APPLICATION
Breathalyzer Mark X+ is recommended for intensive monitoring of the sobriety of employees and for individual users who value measurement precision (e.g. drivers). It is perfect for "mass" control of employees, participants of sports events, in discos, schools, prisons, military units, etc.
ADVANTAGES
- Precise platinum electrochemical sensor
- Backlit TFT 2.4 ”screen (65,000 colors)
- Display resolution up to 3 decimal places
- The result is displayed after 2 seconds
- High accuracy and repeatability of measurements
- Various measurement modes
- Memory of 10'000 measurements and record of refusal to perform a measurement
- Possibility to define according to the user's requirements: measurement units, number of printed copies, time and strength of the sample, switch-off time
- Possibility of cooperation with a printer
- Automatic power cut-off function
- USB port for external power connection
- Calibration certificate from an accredited laboratory**
- Compact structure and durable structure
- 12 months of unlimited calibration
- 2-year warranty
- Stable communication with the Alcovisor® Mark X + breathalyzer via the USB cable
- Simple operation and low operating costs
- Modern look and solid workmanship
- Low noise level when printing
* printout of the measurement carried out with an Alcovisor® Mark X+ may be used as evidence in court cases. Applies to devices sold complete with a printer and with a valid calibration certificate issued by an accredited laboratory
** option additionally payable
Product information | |
Sensor type | Fuel Cell |
Measurement range | 0.000 – 6.300 ‰ |
Measurement units | ‰, % BAC, g/100mL, g/L, mg/100ml, mg/L, mg/ml, ug/100mL * Possibility to change the measuring unit by the service. Factory setting: ‰ permille. |
Display resolution | 0.001 ‰ |
Accuracy of indications | ± 5% * For a correctly calibrated device. |
Alarm threshold | None |
Time to prepare for work | Less than 2 seconds * Time to prepare the device for the first measurement. |
Sampling time | ± 5 seconds |
Measurement modes | Fast - with a passive sample cup Normal - with a mouthpiece |
Sampling mode | Automatic Manual |
Memory | 10'000 measurement records |
Cooperation with application | No |
Cooperation with printer | Yes |
Display | 2.4" TFT colour screen display (65,000 colours) |
Housing | ABS, impact resistant |
USB port | For connecting an external power supply or a printer |
Usage | Large, medium and small companies, personal use, screening |
Additionally included | 4 x 1.5V AA alkaline batteries
5 mouthpieces Pouch Suitcase User manual Warranty card Passive sample cup |
Printer information | |
Printing method | Thermal |
Connection type | Wired, using a USB cable |
Thermal paper | Roll width 57 mm, max. diameter 35 mm |
Printing speed | Approx. 10 seconds / copy |
Number of copies per roll | Approx. 50 |
Working conditions | Temperature: -5 ~ 45°C Humidity: up to 85% RH |
Storage conditions | Temperature: -15 ~ 65°C – without batteries & paper Humidity: up to 85% RH |
Power source | Ni-MH rechargeable battery with a capacity of 1800mAh |
Weight and external dimensions | 155 g (without batteries and paper) 120 x 80 x 35 mm |
Housing | ABS, impact resistant, color black |
Power | |
Power source | 4 x 1.5V AAA alkaline batteries Possibility of power supply from 230V AC / 12V DC mains adapter Possibility of power supply from the car lighter socket USB port |
Energy saving | Automatic power off after 1, 3, 5 or 10 min - user defined |
Working and storage conditions | |
Working conditions | Temperature: -10 ~ 50°C Humidity: up to 95% RH |
Storage conditions | Temperature: -20 ~ 70°C – without batteries Humidity: up to 95% RH |
Quality and safety | |
Certificates and approvals | DOT CE mark RoHS |
Recommended calibration | Every 6 months or 300 measurements (whichever comes first) |
Warranty | 2 years |